The batteries aren’t swappable in the same way as many power tools, but you can still replace the battery when it reaches the end of its life..
It’s important to check so you know how to attach the new belt.. Once you understand how the belt attaches, you may need to remove the brush roll (often by sliding it through the belt loop) and then detach the belt from the motor shaft.On some vacuums, you can just slide off the drive belt without needing to remove the brush roll..
Take a few photos of the brush bar before you remove it, just in case you forget how the various parts fit back together..Step 4: Install the New Belt.Start by placing the new belt around the motor shaft, then thread the brush roll through the belt.. You’ll then need to reinstall the brushroll back into its original location.
For flat or round belts, the tension required may require you to use a screwdriver to pry the end of the belt into the correct position..Your New Belt Will (Probably) Look Too Small.
Depending on the type of belt your vacuum uses, the new one may look or feel too small.
This is partly because the old belt will have stretched during use, but also because many vacuum belts are held in place through tension..These may be more effective than DIY solutions, although you should be careful to follow the instructions closely and avoid using too much of the product.
As always, test a carpet stain remover on a small inconspicuous patch before applying it to a large stain..If a carpet stain remover doesn’t work, then it’s time to call in a professional.
A carpet cleaner will have access to tools and products to remove coke stains without causing damage to your carpet.. Related Article:.How to Keep Your Home’s Carpets Clean.
(Editor: Slim Printers)